ブログに戻る
ハウツーガイド 2026-11-20 Strider Balance Bikes 0 ビュー

Strider Disc Wheel Covers: Install and Remove Guide

Strider Disc Wheel Covers: Install and Remove Guide

Learn how to install and remove Strider Disc Wheel Covers on your balance bike. Includes compatibility, tools, and tips for a secure fit.

What You Need to Know Before You Start

Strider Disc Wheel Covers add a custom look to your child's balance bike and provide a clean surface for decorating. They fit only on Strider 12 Balance Bikes that have the Strider Ultralight Wheel. Before you begin, confirm your bike uses these wheels—the covers will not fit standard wheels.

The covers come as a pair and attach to the spokes. No special tools are required, but you may want a soft cloth to protect the wheel finish. The installation is straightforward, but proper alignment is key to avoid rubbing or loosening during rides.

How to Install Strider Disc Wheel Covers

Follow these steps to attach the covers securely.

  1. Prepare the wheel: Remove the wheel from the bike if you prefer easier access, or work with the wheel on the bike. Clean the spokes and rim area to ensure the cover sits flat.
  2. Align the cover: Place the disc cover over the spokes so that the center hole aligns with the hub. The cover should sit evenly, with no part pressing against the tire or frame.
  3. Secure the cover: Press the cover into place. It snaps onto the spokes using built-in clips. Work around the cover, pressing each clip until it clicks. Check that all clips are engaged and the cover does not wobble.
  4. Test for clearance: Spin the wheel and listen for rubbing. If the cover contacts the frame or fork, remove it and re-center. Repeat for the second wheel.

How to Remove Strider Disc Wheel Covers

Removal is just as simple and does not require tools.

  1. Release the clips: Starting from one edge, gently pry each clip away from the spoke using your fingers. Work your way around the cover.
  2. Lift the cover off: Once all clips are free, lift the cover straight off the wheel. Avoid twisting, which could bend the clips.
  3. Store safely: Place the covers flat in a dry area to prevent warping. They can be reused as long as the clips are intact.

Product Details at a Glance

  • Strider Disc Wheel Covers: Disc Wheel Covers are compatible with all Strider 12 Balance Bikes on the Strider Ultralight Wheel only. Ensures you only attempt installation on the correct wheel type, avoiding fitment issues.
    Strider Disc Wheel Covers
    Strider Disc Wheel Covers
  • Strider Disc Wheel Covers: The covers come in a Standard variant and are priced at USD 9.44 (catalog comparison price USD 14.99). Affordable upgrade that allows personalization without a big investment.
  • Strider Disc Wheel Covers: Strider encourages decorating the discs with art supplies to make the bike unique. The covers are designed to be a canvas for creativity, not just a protective part.

Tips for a Secure and Long-Lasting Fit

Check the clips periodically, especially after rough rides. If a clip breaks, the cover may not stay in place and should be replaced. The covers are not designed for off-road use or contact with obstacles.

When decorating, use only non-toxic art supplies that won't damage the plastic. Avoid heavy adhesives or paints that could add weight or unbalance the wheel. The covers are meant to be lightweight and should not affect the bike's balance.

What the Supplied Information Does Not Cover

The product record does not specify a maximum rider weight or age for the covers themselves. Since they are an accessory, follow the bike's original weight and size limits. The 2-year Limited Warranty covers manufacturing defects only if purchased through an authorized Strider dealer. Damage from improper installation or misuse is not covered.

関連記事

Customer Service
ホーム
商品
カート
マイページ