Come sostituire la gomma dello Strider 14x
By Strider Balance Bikes | Published: 2026-10-25
Category: Guide pratiche
Scopri come rimuovere e installare un nuovo pneumatico sulla tua bici convertibile Strider 14x con questa guida passo passo. Include consigli per evitare errori comuni.
Quick answer
To replace a Strider 14x tire, you'll need a 5 mm Allen wrench and a tire lever. Deflate the tire, break the bead, remove the old tire, install the new one, and inflate to the recommended pressure.
When to replace the tire
Inspect your Strider 14x tire regularly for worn tread, cuts, or bulges. If the tire is bald or has damage that exposes the inner tube, it's time for a replacement. A worn tire reduces traction and can make riding less safe, especially on loose or wet surfaces.
Tools you'll need
You'll need a 5 mm Allen wrench to loosen the binder clamp on the wheel, a tire lever (or two) to pry the tire off the rim, and a pump to reinflate the tire. A patch kit or spare inner tube is handy if you discover a puncture during the process.
Step-by-step tire replacement
- 1. Remove the wheel: Use a 5 mm Allen wrench to loosen the binder clamp on the rear wheel axle. Slide the wheel out of the dropouts. If the chain is still on, note its routing before removing the wheel completely. Common mistake: Forgetting to note the chain routing. Take a photo before removal to avoid confusion.
- 2. Deflate the tire completely: Press the valve stem to release all air. This makes breaking the bead much easier and prevents damage to the rim or tire.
- 3. Break the bead: Push the tire sidewall away from the rim edge all around the wheel. Use your thumbs or a tire lever if needed. Work from both sides until the bead is fully loose. Checkpoint: If the bead is stubborn, apply a little soapy water to the rim edge to lubricate it.
- 4. Remove the old tire: Insert a tire lever under the tire bead and pry it over the rim edge. Slide the lever around the rim to free one side of the tire. Then remove the inner tube and the other side of the tire. Common mistake: Using too much force with a metal lever can damage the rim. Use plastic tire levers if possible.
- 5. Install the new tire: Place one side of the new tire onto the rim. Insert the inner tube partially inflated (just enough to give it shape). Then push the second bead over the rim, starting opposite the valve and working your way around. Ensure the tube is not pinched. Checkpoint: Before fully seating the bead, inflate the tube slightly to check for pinches. Deflate again if needed.
- 6. Inflate and remount: Inflate the tire to the recommended pressure (usually 30-40 psi for a 14" tire). Check that the bead is evenly seated all around. Reinstall the wheel, tighten the binder clamp with the 5 mm wrench, and ensure the chain is properly routed. Common mistake: Overinflating can cause the tire to bulge or the tube to burst. Use a pump with a gauge.
Product facts
- Strider 14x Tire: Compatible with all Strider 14x Convertible Bikes, 14" x 1.75" all-purpose tire, sold individually. If you need a direct replacement, this tire fits your bike perfectly and is designed for rowdy riders who try tricks, ramps, and jumps.
Strider 14x Tire
