What You Need to Know Before You Start
The Strider Rocking Base turns a compatible 12" Strider balance bike into a stationary rocker for toddlers who aren't yet walking. Designed for children ages 6 months to 2 years, it helps build confidence and coordination without the need for batteries or sounds. Before assembling, confirm your bike model and the rider's size.
The Rocking Base is compatible with most Strider 12 models, including the 12 Sport, 12 Pro, 12 Comp, and 12 Classic. It does not fit the Strider 12 ST-R or older versions of Strider 12 models. The intended rider inseam is 31–46 cm (10–18 in.) with a maximum weight of 18 kg (40 lbs).
Strider Rocking Base Compatibility and Limits
- Strider Rocking Base: Compatible with most Strider 12 Models, excluding the Strider 12 ST-R and older versions of Strider 12 Models. Ensures you have the correct bike before starting assembly. Using an incompatible model may prevent secure attachment.

Strider Rocking Base - Strider Rocking Base: With the Strider Rocking Base attached, this product is intended for ages 6 months - 2 years old for Strider 12 Sport, 12 Pro, 12 Comp, and 12 Classic riders. Confirms the age range and prevents use outside the designed developmental stage.
- Strider Rocking Base: Maximum Rider Weight: 18 kg. (40 lbs.) Exceeding this weight limit may affect stability and safety.
How to Attach the Rocking Base to Your Strider Balance Bike
The Rocking Base is designed for easy attachment and removal. The steps below are based on the product's supplied instructions and compatibility notes.
- 1. Gather the parts: You will need the Strider Rocking Base (sold separately from the bike) and your compatible 12" Strider balance bike. The base includes clips that secure to the bike's front and rear wheels. If you need replacement clips, the Rocking Base Parts Kit (product ID 603807) includes base clips, rear wheel clips, and slotted front wheel clips for Gen 2 and 3 bases.
- 2. Position the Rocking Base on a flat surface: Place the Rocking Base on a level floor. The wide, stable base is designed to prevent tipping during use. Make sure the area is clear of obstacles.
- 3. Align the bike with the base: Set the Strider balance bike onto the Rocking Base so that the front and rear wheels sit in the designated slots. The base is shaped to cradle the wheels securely.
- 4. Secure the clips: Attach the provided clips to hold the wheels in place. The base uses push-pin clips for the base assembly and upright clips for the rear wheel. For the front wheel, slotted clips are used. Ensure all clips are fully engaged and the bike does not wobble.
- 5. Check stability before use: Gently rock the base to confirm it is stable and the bike is securely attached. The base is designed for easy removal, so you can take it off when your child is ready to ride freely.
Safety and Care Tips
The Strider Rocking Base contains small parts that may present a choking hazard for young children. Always supervise your child during use. The product is intended for indoor use on a flat surface. Do not use if the rider exceeds the weight or age limits, or if the bike is not compatible. The guarantee and warranty are void if used in a manner for which it was not designed or labeled.
If you need replacement parts, the Rocking Base Parts Kit (product ID 603807) and Rocking Base Top Clip (product ID 603814) are available for Gen 2 and 3 bases. The top clip holds the rear wheel in place and is sold as a single unit; the base requires two total.
Replacement Parts at a Glance
- Rocking Base Parts Kit: This set of replacement parts includes base clips, clips for the rear wheel, and slotted clips for the front wheel of a 12” Strider when it is attached to the Rocking Base. Useful if original clips are lost or damaged. Only fits Gen 2 and 3 Rocking Bases.

Rocking Base Parts Kit - Rocking Base Top Clip: This replacement clip holds the rear wheel in place when 12” Strider bikes are attached to the Strider Rocking Base. Sold as a single unit. The Rocking Base takes 2 total. Allows you to replace a missing or broken rear clip without buying a full parts kit.



